3M VHB adhesive tape 4950P, white, 6 mm x 33 m, 1.1 mm

In developing the 3M Cubitron II Fibre Disc 982CX Pro, 3M engineers have reformulated the breakthrough technology behind 3M Cubitron II abrasives. This revised 3M precision-moulded grain offers even faster stock removal and even longer life to help you be even more productive in your work. The advantage of a complete system 3M Cubitron II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you use 3M Cubitron II discs with our pneumatic angle grinder, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across the industry. When developing the 3M Cubitron II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency Automated grinding processes are only as efficient as the abrasives used for them. Leading robotic system integrators around the world rely on 3M Cubitron II fibre discs for their legendary performance and ability to reduce downtime. The redesigned shaped ceramic grain of the 3M Cubitron II 982CX Pro fibre disc allows robots to finish welds and maximise efficiency long after other fibre discs have had to be replaced.

The  surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to  . The product is intended for industrial / professional use only.

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer good adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high surface energy, such as metals, plastics or glass. The products are characterised by their high transparency.

Dosing - mixing - application in just one operation - for consistent and defined quality. withstands high dynamic loads 3M Scotch-Weld™ DP 100 plus is suitable for bonding a wide range of materials in many applications. DP 100 plus bonds metals such as aluminium and steel, fibre composites, plastics such as ABS, PC, PMMA and PVC as well as glass, ceramics and wood. Very good flow behaviour DP 100plus is characterised by high shear, peel and impact strength as well as good flexibility. Due to these properties, the product is suitable for applications in the automotive and automotive supply industry, in special vehicle construction, in metalworking and for the manufacture of sporting goods. Possible applications Bonding of glass to metals Bonding of jewellery - for transparency and good optics Bonding of plastics such as ABS, PC, PMMA, PVC etc. bonding of plastics such as ABS, PC, PMMA, PVC etc. Maximum strength under challenging conditions Very suitable for potting - good thermal properties Working time at room temperature 5 minutes - hand strength after 20 minutes 3M Scotch-Weld DP100 plus is a slightly flexible 2-component construction adhesive based on epoxy resin with a 1:1 mixing ratio. Hand strength after 20 minutes - Cures at room temperature after 48 hours Information about epoxy resin adhesives Epoxy resin-based construction adhesives achieve high tensile shear strengths of at least 10 MPa - even under difficult conditions. Epoxy resin adhesives are liquid reactive polymers that react chemically when mixed and harden into solid plastics. The chemical reaction takes place in the static mixer - both components are optimally mixed. The processing time now starts and the curing process begins.

Metal waiter's knife with bottle opener, foil cutter and corkscrew with 2 lifting steps. Corks and crown caps can be elegantly removed with the waiter's knives

3M VHB high-performance adhesive tapes are double-sided adhesive tapes made of closed-cell acrylate adhesive. They offer high adaptability to the surfaces to be bonded. Smooth or structured surfaces can be bonded over the entire surface without tension. Ideally suited for a variety of materials with high and medium surface energy, such as metals, plastics, paints or glass. High plasticiser resistance (e.g. with PVC substrates).