3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8625 NS, black, 45 ml
Variants
Ready for immediate dispatch, delivery time approx. 1 - 3 working days
Structural strength with the flexibility of a urethane adhesive 3M Scotch-Weld Flexible Acrylic Adhesive DP8625NS is a structural strength adhesive that cures quickly and requires minimal surface preparation. It is an acrylic adhesive that offers high flexibility and elongation comparable to urethanes or sealants. This black, non-flowing and low-odour 2-component acrylic adhesive enables the use of thin panels as it provides a virtually invisible bond line and shrinks only slightly during curing. It is characterised by a 400 % higher elongation capacity and is resistant to stresses that occur with materials with different thermal expansion coefficients. This adhesive requires minimal surface preparation and is not classified as a health hazard under GHS08. It contains 250 µm glass beads for adjusting the bond line thickness. This adhesive has a working time of 23 minutes and reaches handling strength after 28 minutes. It ensures bonding with minimal surface preparation, even on slightly oily surfaces.
- Tough elastic
- Highly flexible structural adhesive with an elongation capacity of over 200 %
- Improved impact and peel strength
- 23 minutes working time at room temperature - structural strength after 55 minutes
- Reliable performance at low temperatures: new to -40ºC
- Mixing ratio 10:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.
- Non-flammable classification and low-odour formulation: for a better working environment
- Reduces the stresses caused by different thermal expansion coefficients
- Minimally visible bond line and shrinkage during curing, so thin panels can be bonded
- As flexible as a sealant: for greater impact resistance
- Temperature: -55 to +120
- Fast, strong curing: Faster assembly and higher productivity
- Offers innovative design options: Expands your possibilities
- Bonding of various surfaces with minimal surface preparation, including slightly oily surfaces
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
P280E Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
Log in