3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8610 NS, black, 490 ml

Variants

Reset selection

129,16 €*

€0.00* (0.00% saved)

Unit price: 129,16 €* % 0,00 €*

Unit price (net): 108,54 €* % 0,00 €

Contents: 0.49 liter (€263.59* / 1 liter)

Delivery time approx. up to 90 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

Please add the item to your shopping basket and request a quote here so that we can send you an offer with all the costs involved.

Product information "3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8610 NS, black, 490 ml"

The 3M Scotch-Weld Flexible Acrylic Adhesive DP8610NS is a black, non-flowing and low-odour 2-part acrylic adhesive. This high elongation, structural strength acrylic adhesive is ideal for bonding dissimilar materials, joining thin panels where an invisible bond is required and any other application requiring flexible bonds. This unique structural adhesive combines the fast cure and minimal surface preparation of an acrylic adhesive with the typical high flexibility and elongation of urethanes or sealants.

Properties

Tough elastic
Highly flexible structural adhesive with an elongation capacity of over 200 %
Improved impact and peel strength
10 minute working time at room temperature - structural strength after 18 minutes
Reliable performance at low temperatures: new to -40ºC
Mixing ratio 10:1
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.

Advantages

Non-flammable classification and low-odour formulation: for a better working environment
Reduces the stresses caused by different thermal expansion coefficients
Minimally visible bond line and shrinkage during curing, so thin panels can be bonded
As flexible as a sealant: for greater impact resistance
Temperature: -55 to +120

Product benefits

Fast, strong curing: Faster assembly and higher productivity
Offers innovative design options: Expands your possibilities

Field of application

Bonding of various surfaces with minimal surface preparation, including slightly oily surfaces

Questions about the article?

Signal word

Attention

Hazard pictogram(s)

Ausrufezeichen

Hazard statement / CLP

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.

Prevention

P280E Wear protective gloves.

Reaction

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 36689

Part number: DP8610490

SAP number: 7100232802

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Selection guide Find safety data sheet

Zubehör

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

3M Scotch-Brite hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Rot | Körnung: Very fine | Länge in m: 0,224 m

Faservlies-Handmaterial zum Reinigen, Entgraten, Finishen und Anschleifen von Oberflächen im Bereich Metall, Holz, Kunststoff und anderen Sektoren in Industrie und Gewerbe.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*