tesa double-sided mounting tape ULTRA STRONG 19mmx5m colorless

Variants

Breite in mm

Länge in m

Reset selection

13,21 €*

€0.00* (0.00% saved)

Unit price: 13,21 €* % 0,00 €*

Unit price (net): 11,10 €* % 0,00 €

Contents: 5 meter (€2.64* / 1 meter)

Ready for immediate dispatch, delivery time approx. 1 - 3 working days

Prices incl. VAT. Free shipping in the online shop (DE/AT)**

Please add the item to your shopping basket and request a quote here so that we can send you an offer with all the costs involved.

Product information "tesa double-sided mounting tape ULTRA STRONG 19mmx5m colorless"

The Powerbond Ultra Strong mounting tape is the strongest mounting tape from tesa and is suitable for securely fastening objects indoors and outdoors. tesa Powerbond Ultra Strong is the strongest mounting tape from tesa®. It is suitable for attaching objects indoors and outdoors. The impressive adhesive performance of up to 10 kg per 10 cm means that you can do without drills, plugs and screws even when fixing heavier objects. The mounting tape is easy to handle and provides a permanent and reliable hold.

The extra strong mounting tape - securely fasten heavy objects without drilling For a long time, it was an unwritten law that heavy objects could only be securely fastened using screws or nails. With the introduction of tesa Powerbond® Ultra Strong at the latest, the law was broken. The strongest mounting tape from tesa positions itself as a real competitor to the drill with its high holding power. Thanks to the superior tesa® adhesive technology and an adhesive performance of up to 10 kg per 10 cm of tape, it is able to provide a permanently secure hold even for objects with a higher weight. With tesa Powerbond® Ultra Strong you can work quickly, cleanly and avoid damage such as drill holes in the substrate. Better bonding than drilling! GOOD TO KNOW ... OUR APPLICATION TIPS:

- APPLYING: In order for the mounting tape to develop its full holding power, the object and substrate must be free of dust, dirt and grease. A brush, a lint-free cloth and a silicone-free cleaner (or white spirit) are suitable for cleaning.

- Check whether the surface or the object is rough. Apply the mounting tape to the rougher surface first.

- Apply the tape in vertical strips over the full length of the object or surface. Reinforce the upper area with shorter strips, as this is where the greatest load is applied. Press the mounting tape down firmly for at least five seconds.

- Remove the protective film from the double-sided adhesive tape and take care not to touch the open adhesive surface. This could impair the adhesive strength.

- Fix the object and press firmly again for at least five seconds.

-REMOVE: As the mounting tapes are intended for permanent use, material residue may remain on the object. Try to remove the residue with tesa® adhesive remover. To ensure that the substrate remains as undamaged as possible, carefully pull the mounting tape parallel to the wall

Properties

Ultra-strong adhesive on both sides
Can be cut to size individually

Advantages

Works indoors and in protected outdoor areas (not UV-resistant, protect from direct contact with water)

Product benefits

Holds objects up to 6 kg per application (for flat objects up to 10 mm deep and on most smooth, sufficiently firm surfaces)
Sticks to tiles, wood, stone, metal and most plastics

Questions about the article?

0 from 0 Reviews

Give us a rating!

Share your experience with the product with other customers.

Es wurden Maßnahmen ergriffen, um sicherzustellen, dass die veröffentlichten Bewertungen nur von solchen Verbrauchern stammen, die die Waren oder Dienstleistungen tatsächlich genutzt oder erworben haben.

Log in

Your e-mail address

Your password

Display ratings in the current language only.

No reviews found. Go ahead and share your findings with others.

Article no: 32830

SAP number: 55792-00001-02

Do you need die-cut parts?

We will be happy to provide you with a non-binding offer.

Enquiry form

Further links

Product brochure Selection guide Find safety data sheet

Zubehör

3M Scotch-Brite hand pad CF-HP 7447+, red, 158 mm x 224 mm, A, very fine

Breite in mm: 158 mm | Farbe: Rot | Körnung: Very fine | Länge in m: 0,224 m

Faservlies-Handmaterial zum Reinigen, Entgraten, Finishen und Anschleifen von Oberflächen im Bereich Metall, Holz, Kunststoff und anderen Sektoren in Industrie und Gewerbe.

Contents: 0.224 meter (€7.99* / 1 meter)

€1.79*

3M VHB cleaning cloths 150mmx150mm

For degreasing, cleaning and preparing parts to be joined before bonding. Ideal for use on metals, many plastics and coloured surfaces. The cleaner is a mixture of isopropaneinl and distilled water (70:30). The surface should be checked for compatibility before use.

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

S-K-S 560 Lime-based industrial cleaner, clear, 500 ml

S-K-S lime-based industrial cleaner removes residues of most dried and non-chemically curing adhesives and sealants, adhesive tapes and films, stickers and labels as well as greasy, oily dirt, tar residues and rubber abrasion. The non-corrosive product gently cleans even stubborn dirt from (un)coated and painted metals, aluminium alloys, stainless steel, glass and ceramics as well as plastics such as ABS, PC, PE, PMMA, PP, PVC, etc. S-K-S is also suitable for degreasing and cleaning equipment and work areas. The surface should be checked for compatibility before use

Contents: 0.5 liter (€34.86* / 1 liter)

€17.43*

S-K-S pressure roller with rubber roller diameter = 30mm, roller width: 45mm

Breite in mm: 45 mm | Typ: S-K-S

The hand roller is ideal for pressing on 3M Safety-Walk anti-slip floor coverings and adhesive tapes after installation. Its large roller diameter and weight make it quick and easy to use. Dimensions: 45 mm wide.

€33.13*

S-K-S 550 Cleaner Isopropanol 99.9% 1 liter

ml: 1000 ml

The surface cleaner is used to degrease, clean and prepare parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The surface cleaner consists of isopropanol. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and only use clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request to . The product is intended for industrial / professional use only.

Variants from €19.99*

€16.99*

Customers also bought

tesafix 4965 12mmx50m transparent

tesafix 4965 is a double-sided, transparent polyester adhesive tape with acrylic adhesive. It is covered with a red film. tesafix 4965 is characterised by its good adhesive strength on various plastics such as ABS and even EPDM, as it is highly resistant to plasticisers.

Contents: 50 meter (€0.32* / 1 meter)

Variants from €8.83*

€16.05*

3M Bumpon SJ5302 transparent 'Blister'= 80pcs / Width: 7,9mm Height: 2,2mm

3M Bumpon SJ5302BL Elastikpuffer, 80 Stück pro Mini-Pack, sind im Haushalt oder am Arbeitsplatz als Gerätefüße, Anschlagpuffer oder Abstandhalter einsetzbar.Diese Elastikpuffer aus Polyurethan sind weichmacherfrei, selbstklebend und äußerst rutschfest und hinterlassen keine Kratzer oder Flecken auf der Oberfläche. Die zylinderförmige flache Oberfläche sorgt für eine ausgezeichnete Druckbelastungstoleranz und Rutschfestigkeit. Sie sind dank 3M Haftklebstoff leicht anzubringen, bleiben weich und flexibel. Dämpft Vibrationen und Geräusche von kleinen Haushaltsgeräten, -gegenständen und elektronischen Geräten. Als Abstandhalter zur Ausrichtung von Bilderrahmen oder beim Transport zur Vermeidung von direktem Kontakt zwischen Produkten einsetzbar. Lassen sich als Anschlagpuffer für Schranktüren, Türen, Klappen usw. verwenden, um Ihr Produkt vor Dellen, Abnutzung und Beschädigung zu schützen sowie Vibrationen und Geräusche zu dämpfen. Als rutschfeste Gerätefüße auf der Unterseite kleiner Geräte anzubringen. Zum Schutz von Oberflächen vor Kratzern, Beschädigungen und Dellen. Ideal für elektronische Geräte, wie Mobil- und Festnetztelefone, Elektronikschränke, Tastaturen, Fußpedale, Waagen, Uhren, Lautsprecher, Stereoanlagen, DVD Player und Computer.

€6.88*

3M Bumpon SJ5308 transparent 'Blister'= 40pcs / Width: 12,7mm Height: 3,1mm

3M Bumpon SJ5308BL Elastikpuffer, 40 Stück pro Mini-Pack, sind im Haushalt oder am Arbeitsplatz als Gerätefüße, Anschlagpuffer und Abstandhalter einsetzbar. Diese Elastikpuffer aus Polyurethan sind weichmacherfrei, selbstklebend und äußerst rutschfest und hinterlassen keine Kratzer oder Flecken auf der Oberfläche. Die flache Oberfläche sorgt für eine ausgezeichnete Druckbelastungstoleranz und Rutschfestigkeit. Sie sind dank 3M Haftklebstoff leicht anzubringen, bleiben weich und flexibel. Dämpft Vibrationen und Geräusche von kleinen Haushaltsgeräten, -gegenständen und elektronischen Geräten. Als Abstandhalter zur Ausrichtung von Bilderrahmen oder beim Transport zur Vermeidung von direktem Kontakt zwischen Produkten einsetzbar. Lassen sich als Anschlagpuffer für Schranktüren, Türen, Klappen usw. verwenden, um Ihr Produkt vor Dellen, Abnutzung und Beschädigung zu schützen sowie Vibrationen und Geräusche zu dämpfen. Als rutschfeste Gerätefüße auf der Unterseite kleiner Geräte anzubringen. Zum Schutz von Oberflächen vor Kratzern, Beschädigungen und Dellen. Ideal für elektronische Geräte, wie Mobil- und Festnetztelefone, Elektronikschränke, Tastaturen, Fußpedale, Waagen, Uhren, Lautsprecher, Stereoanlagen, DVD Player und Computer.

€6.88*

3M VHB cleaning cloths 150mmx150mm

Contents: 0.15 meter (€1.73* / 1 meter)

€0.26*

tesafix 4965 19mmx50m transparent

Contents: 50 meter (€0.51* / 1 meter)

Variants from €8.83*

€25.45*

3M Scotchlok 314 connector, moisture-resistant, flame-retardant, blue, 600 V, max. 0.5 - 1.5 mm², 50 pieces / pack

The 3M Scotchlok connector is suitable for connecting solid or stranded conductors in installation wiring technology. With a cross-section range of 0.5 to 1.5 square millimetres, it enables a through-connection on uncut conductors. The Scotchlok connector can withstand a maximum voltage of up to 600 volts and a maximum temperature of 105 °C. It can be used in control, measurement and regulation applications as well as in automotive electrics and switchgear construction. Its mode of operation is based on the principle of a U-element: the conductors to be connected are fed into the connector without having to be stripped first. By applying light pressure with the pliers, the U-shaped elements remove the wire insulation, enlarge the contact surface and establish contact with the conductor. The spring-loaded U-element encloses the individual cores and ensures a mechanically strong, vibration-proof, electrically perfect and permanent connection. The connector has been tested and certified by the VDE Institute in accordance with EN60998-2-3 and fulfils the requirements of IPX8 (2h, 1m). The Scotchlok connector is also UL and C.S.A. listed.

Variants from €0.60*

€0.69*