tesa 60153 Adhesion Promoter Fast Cure is used to improve the adhesion of tesa ACXplus adhesive tapes on a variety of surfaces. By using the product, a very high adhesive strength and bond strength can be achieved even on critical surfaces such as PP/EPDM. tesa 60153 Adhesion Promoter can be detected under UV light after application. The UV pigments are contained in the solution.
- Primer (bonding agent)
- Fast-acting adhesion promoter to increase the adhesive strength on various substrates
- The product is suitable for use on surfaces that are difficult to bond, such as PP, PE or EPDM, as well as structured plastic and metal surfaces, e.g. for the long-term attachment of add-on parts for the automotive industry.
H225 Highly flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H304 May be fatal if swallowed and enters airways.
H410 Very toxic to aquatic life with long lasting effects.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P362+P364 Take off contaminated clothing and wash before reuse.
P501 Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/ internationalen Vorschriften.
Log in