Ready for immediate dispatch, delivery time approx. 1 - 3 working days
The 3M VHB surface cleaner is used for degreasing, cleaning and preparing parts to be joined before bonding. It can be used on various smooth materials, such as metals, plastic, glass, etc. The VHB surface cleaner consists of a special mixture of isopropanol and distilled water. Please check compatibility with the materials used before use. Clean all surfaces carefully before each application and use only clean, lint-free cloths. The best bonding results are achieved if you pre-clean the parts to be bonded, then roughen them (e.g. with Scotch-Brite 7447) and clean them again. Make sure that the surfaces are completely dry before you start bonding. For further information, please refer to the safety data sheet, which we will be happy to send you on request at . The product is intended for industrial / professional use only.
- Evaporates quickly and residue-free
- Mixture of isopropanol (approx. 90%) and distilled water (>10%)
- Optimum adhesion for the adhesive tape
- Reduced reworking
- Process reliability
- No regreasing
- For degreasing, cleaning and preparing parts to be joined before bonding
- For use on metals, painted surfaces and many plastics
- The surface should be checked for compatibility before use
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P261A Avoid breathing vapour.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P370+ P378G In case of fire: Use extinguishing media for flammable liquids such as dry chemical or carbon dioxide to extinguish.
Log in
2023
Sören L.
A+++
Schnell geliefert, gut verpackt, top Ware