3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX system DP 8425 NS, green, 45 ml
Variants
Ready for immediate dispatch, delivery time approx. 1 - 3 working days
3M Scotch-Weld DP8425NS is a viscoplastic 2-component construction adhesive based on acrylate for the EPX system. The non-flowing product with a very short processing time is characterised by low odour development and very high shear, impact and peel strengths. Scotch-Weld DP 8405 NS is also slightly oil-tolerant and has been developed for bonding metals and plastics such as ABS, PC, PMMA, PVC, etc.
- Tough elastic
- Very high shear strength
- Very high impact and peel strength
- Processing time of 22 to 24 minutes
- Mixing ratio 10:1
- Contains glass beads for adjusting the adhesive layer thickness
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.
- Very short processing time
- Non-flowing
- Low odour development
- Good adhesion to powder-coated surfaces
- Initial loading of the joined parts possible after a very short time
- Slightly oil-tolerant
- Low halogen
- Longer shelf life without cooling
- Bonding of metals and plastics such as ABS, PC, PMMA and PVC etc.
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261A Avoid breathing vapours.
P280E Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
P370+ P378G In case of fire: Use extinguishing media for flammable liquids, such as dry chemical or carbon dioxide to extinguish.
Log in