3M Scotch-Weld 2-component acrylic-based construction adhesive for the EPX System DP 8407 NS, gray, 45 ml
Variants
3M Scotch-Weld DP8407NS (non-sag) is a solvent-free and non-flowing two-component acrylate-based construction adhesive with a short working time of 5 to 7 minutes. The viscoplastic adhesive with a mixing ratio of 10:1 is characterised by high tensile shear strength and is suitable for high-strength bonding of metals (e.g. aluminium, bronze, stainless steel, copper, brass, galvanised steel, zinc), plastics (e.g. ABS, PC, PMMA and PVC) and other materials. The DP8407NS contains glass beads for setting the optimum adhesive layer thickness and has a high temperature resistance.
- Tough elastic
- Very high shear strength
- Very high impact and peel strength
- UL-listed
- Processing time from 5 to 7 minutes
- Temperature resistance 150°C
- Mixing ratio 10:1
- Contains glass beads for adjusting the adhesive layer thickness
Important: Mixing nozzle, feed piston and EPX hand applicator are not included with the adhesive. Please order these accessories separately.
- Very short processing time
- Non-flowing
- Low odour development
- Good adhesion to powder-coated surfaces
- Initial loading of the joined parts possible after a very short time
- Slightly oil-tolerant
- Low halogen
- Longer shelf life without cooling
- Bonding of metals and plastics such as ABS, PC, PMMA and PVC etc.
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
P280E Wear protective gloves.
P273 Avoid release to the environment.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P333+ P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Inhalt / Behälter einer Entsorgung gemäß den lokalen / nationalen Vorschriften zuführen.
Log in